Brief description of the position of the cabinet handle device
Sometimes, after the overall decoration is completed, people always feel particularly uncomfortable when using or seeing cabinets, and they can't even describe where it is uncomfortable. In fact, if you find yourself feeling this way, it is usually because there is a problem with the position of the cabinet handle device. So where should the cabinet handle be installed? Now let the stainless steel handle manufacturer talk about it.
Cabinet handle device position
There are generally two types of integrated cabinets now, one is hanging type cabinets, and the other is desktop cabinets. Hanging kitchen cabinets are generally relatively high, and the handle should be positioned according to the height of the female owner. The height of the handle should not exceed the height of the female owner's hand when touching the height, or be 1-2 inches above the bottom of the cabinet door.
The handle of a desktop kitchen cabinet should be placed on the upper part of the cabinet door, preferably on the side of the upper fifth of the door or one inch above and below the door, so that housewives can easily open the cabinet door without having to bend down.
In addition, the upper handle should be installed in the lower corner of the cabinet, while the lower handle is exactly the opposite and should be installed in the upper corner of the cabinet. Not only to meet the requirements of ergonomics standards, but also for the visual beauty of form.
The installation method of cabinet handles
1. Measure the distance between the holes of the handle device using a tape measure.
2. Draw the cabinet door panel with a handle and measure the position of the device on the cabinet door.
3. Select a suitable size drill bit, plug in and start the electric drill, and use the drill bit to drill the screw device hole.
4. Hold the handle on the outside and thread the screws from the inside of the cabinet to the outside on the inside.
5. Align the screw with the hole of the handle device and tighten it with a screwdriver.
The above is the device location and detailed installation method that we have introduced to us. If people do not install it correctly, it will be inconvenient to use, and it will also make people feel uncomfortable. Therefore, this requires us to find skilled technicians when installing, so as to have better protection.
Article source: Stainless steel handle manufacturer http://m.649292.com
-
04-25
Stainless steel handle manufacturer: How to deal with dirty hotel handles?
Cleaning and protection(1) When cleaning the exterior of the decoration pipe, gently wipe it with a damp cloth, and be careful not to use too much force to avoid scratching the exterior of the decorat
-
04-13
Bathroom door handle manufacturer: General decorative hardware accessories
Universal decoration hardware accessories refer to machine parts or components made of hardware, as well as some small hardware products. It can be used alone or as a helper. For example, hardware too
-
12-02
Maintenance of stainless steel handles
Maintenance of stainless steel handlesThere are various styles of interior design nowadays, but stainless steel handles are mostly prioritized in the selection of handles. Due to its elegant appearanc
-
11-09
Stainless steel handle manufacturer: What are the issues to pay attention to when choosing a door handle?
What are the issues to pay attention to when choosing a door handle?Due to the general lack of national standards for door handles, most consumers have little knowledge about the quality of door handl